JVC CX-7000 Series User Manual

m

v

If the card is not drawn into the card feed roller and is left inside
the printer, use the tweezers (supplied) to remove the card.
A

 Turn off the power

B

 Check the position of the card that is left inside the printer

.

C

 Pick up the card using the tip of the tweezers (supplied)

v

Be careful not to drop the card inside the printer.

D

 Pull out the card slowly

.

v

The card may be very hot. Be careful not to burn your fingers
when removing the card.

v

If the card cannot be removed, do not try to do so forcibly.
Consult our authorized dealers or the servicing personnel.

Example of how to pick up the card

.

v

Pick up the card by following the diagram above.

E

 Install the retransfer film cassette, and close the printer door

.

F

 Turn on the power

m

If the card is caught in the card feed roller to the right of the
retransfer heating roller
A

 Turn off the power, and detach the card hopper

.

B

 Check the position of the card

C

 Attach the jog dial to the card feed roller shaft and cleaning

roller shaft

.

.

D

 Turn the card feed roller shaft and cleaning roller shaft in the

clockwise direction, while checking the position of the card

.

v

Remove the card after it is discharged from the card load slot.
(For single-sided printers, the card is discharged from the NG
card outlet.)

v

If the card cannot be removed, do not try to do so forcibly.
Consult our authorized dealers or the servicing personnel.

E

 Restore the jog dial to its original position, and install the card hopper

F

 Install the retransfer film cassette, and close the printer door

G

 Turn on the power