HP (Hewlett-Packard) T1200 User Manual

If your print has vertical bands of different colors along it:

Try using thicker paper, choosing from the recommended paper types such as HP Heavyweight
Coated Paper and HP Super Heavyweight Paper. See 

.

Try using higher print-quality settings (see 

). For instance, if you have set the

Print Quality slider to Speed, try setting it to Quality.

You may notice white spots on the print. This is probably due to paper fibers, dust or loose coating
material. To avoid this problem:

Try cleaning the paper manually with a brush before printing, to remove any loose fibers or
particles.

Always keep the cover of your printer closed.

Protect your paper rolls and sheets by storing them in bags or boxes.

If the colors of your print do not match your expectations, try the following:

Check that the paper type you have loaded corresponds to the paper type selected in the front
panel and in your software. To check on the front panel, use the 

View information

 key  . At the

same time, check the color calibration status. If the status is PENDING or OBSOLETE, you
should perform color calibration: see 

. If you have made any

changes, you may wish to reprint your job in case the problem has been solved.

Check that you are printing on the correct side of the paper.

Check that you are using appropriate print-quality settings (see 

). If you have

selected the Speed or Fast options, you may not get the most accurate colors. If you change the
print-quality settings, you may wish to reprint your job at this point in case the problem has been
solved.

If you are using Application Color Management, check that the color profile you are using
corresponds to the selected paper type and print-quality settings. If you have doubts about which
color settings to use, see 

If the problem consists of color differences between your print and your monitor, please follow
the instructions in the “How to calibrate your monitor” section of the HP Color Center. At this
point, you may wish to reprint your job in case the problem has been solved.

ENWW

Vertical lines of different colors 157