HP (Hewlett-Packard) T1200 User Manual

To move the paper, select the Paper menu icon 

 and then Move paper.

You can move the paper forwards by pressing the 

Up

 key on the front panel, or backwards by

pressing the 

Down

 key. When the paper is positioned as you want it, press the 

OK

 key.

To maintain paper quality, follow the recommendations below.

●

Store rolls covered by another piece of paper or cloth

●

Store cut sheets covered and clean or brush them before loading them in the printer

●

Clean input and output platens

●

Always keep the window of your printer closed

Photo and coated paper requires careful handling, see 

.

You may wish to change the drying time setting to suit special printing conditions such as multiple
prints where time is of higher importance or when you need to be sure ink is dry before handling.

Select the Setup menu icon 

, then Print retrieval > Select drying time. You can select:

●

Extended, to set a longer than recommended time to ensure ink is completely dry

●

Optimal, to set the default and recommended time for your selected paper (this is the default
setting)

●

Reduced, to set a shorter than recommended time when quality is of lower importance

●

None, to disable the drying time and remove your print as soon as it finishes printing

If the ink is not dry when the print is removed it could leave ink in the output tray and

marks on the print.

If you cancel the drying time during a print, the printer may not feed and cut the paper right

away due to the printhead maintenance, which runs in parallel. If the dry time is zero, the printer cuts
the paper and then performs the printhead maintenance. However, if the dry time is greater than zero,
the printer does not cut the paper until after the printhead maintenance has completed, even if you
press the 

Form feed and cut

 key 

.

44

Chapter 5   Paper handling

ENWW