JVC GV-HT1U User Manual

 EN

Use the provided AA-V68 AC adapter/Charger for charging the battery. Batteries that have not
been completely depleted can also be charged.

•Approximate charge time

→

Approx. 90 min for each BN-V607 battery

•Charging not possible

→

Charging is not possible when the DC cord is
connected to the AC adapter.

•Number of prints per battery charge

→

40 prints for each BN-V607 battery (at room
temperature)

• If you connect the DC cord to the AC adapter during battery charging, power is supplied to the printer

and charging stops.

• When charging the Battery for the first time or after a long storage period, the Charger Indicator may not

light. In this case, remove the Battery from the AC Power Adapter then try charging again.

• Since the AC Power Adapter processes electricity internally, it becomes warm during use. Be sure to use

it only in well-ventilated areas.

• If the battery operation time remains extremely short even after having been fully charged, the battery is

worn out and needs to be replaced. Please purchase a new one.

•Connect the power cord to a wall outlet.

•The charge indicator starts to blink.
•Charging has completed when the indicator

stops blinking and is on continuously.

•Remove the power cord.

(Blinks during charging 

→

 Lights continuously when charging completes.)

To AC outlet

Place side with
   and    symbols
face down.