HP (Hewlett-Packard) CE914A#BGJ User Manual
Clean the product
Clean the paper path
If you are experiencing toner specks or dots on the printouts, clean the paper path. This process uses
a transparency to remove dust and toner from the paper path. Do not use bond or rough paper.
a transparency to remove dust and toner from the paper path. Do not use bond or rough paper.
NOTE:
For best results use a sheet of LaserJet transparency. If you do not have any
transparencies, you can use copier-grade media (60 to 163 g/m
2
(16 to 43 lb)) that has a smooth
surface.
1.
Make sure that the product is idle and the Ready light is on.
2.
Load paper in the input tray.
3.
In the Windows system tray, right-click the Device Settings icon and then click the product
name.
name.
4.
Click the Device Settings tab.
5.
Click the Print Cleaning Page button.
NOTE:
The cleaning process takes about 2 minutes. The cleaning page stops periodically during
the cleaning process. Do not turn the product off until the cleaning process has finished. You might
need to repeat the cleaning process several times to thoroughly clean the product.
need to repeat the cleaning process several times to thoroughly clean the product.
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the device.
Product updates
Software and firmware updates and installation instructions for this product are available at
. Click Downloads and drivers, click the operating system, and
then select the download for the product.
90
Chapter 8 Manage and maintain the product
ENWW