HP (Hewlett-Packard) P3010 User Manual
3.
Disconnect one connector (callout 1; J14), release the wire harness from the guide (callout 2), and
then remove two screws (callout 3).
then remove two screws (callout 3).
Figure 2-47
Remove the front-right and right-side cover assembly (2 of 6)
1
2
3
4.
Slightly push the cover assembly toward the front of the product to release it, and then carefully
rotate the cover away from the product.
rotate the cover away from the product.
CAUTION:
Do not damage the covers or the cartridge-door assembly (if you did not remove it)
when you rotate the cover assembly away from the product.
Do not dislodge the power-switch assembly (callout 1) when you rotate the cover assembly away
from the product.
from the product.
Figure 2-48
Remove the front-right and right-side cover assembly (3 of 6)
1
ENWW
Removal and replacement procedures
77