HP (Hewlett-Packard) LH 6000 User Manual
Chapter 1
General Information
14
Light Pipes Display PCI LEDs
PCI Hot Plug LEDs (Internal)
Amber
Green
Status Indicated
Your Action
Off
On
Power to the slot is on, and the slot is
operating normally.
operating normally.
Do not remove the board from the slot.
On
On
The slot needs attention, but power
to the slot is on.
to the slot is on.
Do not remove the board from the slot.
On
Off
The slot needs attention, but power
to the slot is off.
to the slot is off.
You can safely remove the board from this
slot.
slot.
Off
Off
Power to the slot is off.
You can safely remove the board from this
slot.
slot.
Power Supply LEDs
Interpret the green LEDs on the power supplies in this way:
Green LED
Indicates this HP NetServer Status:
Steady Green
The system is powered up.
Flashing
The system is in stand-by or power-save mode.
Off
The AC line is unplugged or the power supply has failed.
LAN LEDs
The LH 6000 has two LEDs on either side of the RJ-45 connection. Interpret the LEDs in this way:
Local Area Network LED Status
Green LED
Yellow LED
LAN Status:
On/Flashing
Off
The LAN is connected and data is being transferred at 10Mbps.
On/Flashing
On
The LAN is connected and data is being transferred at 100Mbps.
Off
Off
The LAN is not connected or is not operational.
Main Menu
This is the status screen default display for the LH 6000:
HP NetServer
LH 6000
LH 6000
1. To reach the main menu from this default screen, press the Enter button.
NOTE
The status screen displays two lines of an entire menu at a time.
This is the entire Main Menu:
***Main Menu****
>Event Log
>FW Info
>System Info
>Component Info
>Service
>Adjust Contrast
>FW Info
>System Info
>Component Info
>Service
>Adjust Contrast