HP (Hewlett-Packard) LH 6000 User Manual
Chapter 2
System Information
28
Depth
724.2 mm (28.5 in)
Weight
72.6 – 78.5 kg (160 - 173 lb.)
HP NetServer LH 6000r
Height
354.7 mm (14 in)
Width
482.6 mm (19 in)
Depth
749.2 mm (29.5 in)
Weight
72.6 – 78.5 kg (160 - 173 lb.)
Power Requirements
Power Supply Specifications: Three power supplies, plus one for redundancy
Power supply type
Input voltages:
Input voltages:
Nominal:
Range:
Wide range, PFC
100 to 240 VAC, 11.7A/5.6 A at 50/60 Hz
90 to 264 VAC at 47 - 63 Hz
90 to 264 VAC at 47 - 63 Hz
Power availability:
780 W continuous
Minimum System Requirements
Voltage
Volt/Amps
Amps
Watts
100
1177
11.7
1166
120
1153
9.6
1141
200
1120
5.6
1099
230
1117
4.9
1095
Switch Settings
The configuration switch, S1, is located on the lower left of the system board of the system board assembly.
To change the switch settings, it is recommended that the system board assembly be removed from the
chassis.
To change the switch settings, it is recommended that the system board assembly be removed from the
chassis.
NOTE
Only the first four switches set the processor speed. Do not change the processor
speed switch settings.
speed switch settings.