HP (Hewlett-Packard) LH 6000 User Manual
Chapter 6
Replacing Parts
82
4. If you have a rack-mounted LH 6000r, then consider removing the cables from the rear of the
enclosure before extending the enclosure on the slides (if you don't have a cable management
arm). If necessary, label the cables to support re-connecting them.
arm). If necessary, label the cables to support re-connecting them.
5. Remove the top cover (rack-mount orientation) or the left side cover (pedestal version).
CAUTION
Wear a wrist strap and use a static-dissipating work surface connected to the
chassis when handling components. Ensure that the metal of the wrist strap
contacts your skin.
chassis when handling components. Ensure that the metal of the wrist strap
contacts your skin.
6. Locate and remove the DIMM from the I/O board.
HP NetRAID
DIMM
I/O Board
NOTE: The I/O board
does NOT have to be
does NOT have to be
removed to swap out
the DIMM.
the DIMM.
Remove the HP NetRAID DIMM from the I/O Board
7. Replace the DIMM and reassemble the system.
Replacing the System Battery
1A
1B
2A
2B
3A
3B
4A
4B
DIMM
Slots
Slots
Battery
System Board – Battery Location
The installation procedure is the same for the rack-mount and the pedestal HP NetServers once you gain
access to the system board assembly.
access to the system board assembly.