HP (Hewlett-Packard) 510 User Manual

maintain your hp digital copier

38

hp digital copier series

5

If there is plastic tape on the failed printhead, remove the plastic tape.

6

Push the failed printhead firmly down into the appropriate slot using 

the printhead handle. Do not touch the printhead tower, and do not 

remove the printhead handle.

7

Move the print carriage latch down, and make sure the loops catch 

the hooks. Snap the latch into place, then close the print carriage 

access door.

8

If the error message still appears, remove and reinsert the printhead 

again and close the print carriage access drawer.

9

If the error message still appears, replace the printhead as described 

in the following section.

replace the 

printheads

If you experience problems with that quality of your copies that cannot be 

resolved by cleaning your printheads, you may need to replace them. You 

may also see front-panel display messages that indicate when an individual 

printhead needs to be replaced.
See order printheads and ink cartridges on page 86 for information on 

ordering replacement printheads.

1

Turn on the unit, then open the print-carriage access door by lifting 

the handle until the door locks into place.
The print carriage moves to the center of the unit.

Pull the printhead handle upward

GwenRG.book  Page 38  Thursday, January 31, 2002  5:20 PM