Genicom microLaser 210 User Manual
Publication No. GEG-99054
Genicom
Mar 00
4-18
microLaser 210 User Guide
Cleaning the Printer
Cleaning the Printer
1.
Turn the printer off by pressing the [ O ] on the power switch on the right side of the printer,
and disconnect the AC power cord from the wall outlet.
and disconnect the AC power cord from the wall outlet.
2.
Using a soft cloth that is slightly damp with cold water, wipe the printer covers and tray faces.
Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.
Use a very mild, non-abrasive soap to remove heavy dirt and toner stains.
3.
Use a soft, dry cloth to thoroughly dry the covers and tray faces.
Do not use solvents or abrasive cleaners to clean printer covers. Use only cold water and a
very mild soap.
very mild soap.