Hobart ML-29268 User Manual

Page of 44
Access PrePack System Operator Manual
F-35512 (Mar. 2006)
1-1
Introduction
Chapter 1: Introduction
                                                      
Introduction
Welcome
The Access PrePack System was designed as a meat room or pro-
duce back room scale.  It gives you merchandising capabilities 
with multiple fonts, graphics, and label types.
 
Access PrePack System
All necessary operator data appears on the touch screen.
FCC Note
This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the FCC 
rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in 
a residential area is likely to cause harmful interference; in which 
case, the user will be required to correct the interference at their 
own expense.
Verify Correctness of 
Weight and Price
Routinely verify label information. Check the multiplication of 
price per pound times weight, and check the scale weight against 
printed label weight. Weigh the same package several times to 
verify outcome consistency. Packages that weigh near the middle 
of the 0.01 lb. increment will normally vary up or down by 
0.01 lb. Greater variation than 0.01 lb indicates the system needs 
adjustment. In such a case, or whenever necessary, contact your 
local Hobart Representative.