Sony UPX-C100 User Manual

Page of 77
Menus
38
Setting the Shooting Conditions
The shooting conditions of the camera are factory set to Manual Exposure, Flash: Auto, but you can change the shooting 
conditions using the menus as necessary.
The shooting conditions available for configuration differ depending on the exposure control and flash settings, as 
shown in the table below.
 : Default setting
* When shooting in a dimly lit environment, switching the exposure compensation will not change the exposure level.
EXPOSURE
&
FLASH Mode
Flash 
Control
Prelighting/
Prephotometry
Aperture
Shutter Speed
ISO Sensitivity
White Balance
Exposure 
Compensation 
Auto Flash*
Auto 
with Preflash
Prephotometry
Prelighting
Auto
Auto
Auto
Auto
+/–2.0EV
by 1/3EV Step
(Shutter Control)
+2.0EV
+1.7EV
+1.3EV
+1.0EV
+0.7EV
+0.3EV
±0.0EV
–0.3EV
–0.7EV
–1.0EV
–1.3EV
–1.7EV
–2.0EV
Flash ON*
Prephotometry
Prelighting
Flash OFF
No Lighting
Prephotometry
No lighting
RED EYE*
Auto 
with Preflash
Prephotometry
Red Eye 
Reduction 
Lighting
Controlled 
Flash 
without pre-
flash
Auto with 
Zoom and EV
No Prephotometry
No Prelighting 
Lighting Only 
when Shooting
Fixed
(Open)
Fixed
(1/250)
Auto with 
Zoom and EV
Auto
+/–2.0EVby 
1/3EV Step
Forced Flash
without pre-
flash
 – 
7 steps
(100/70/50/35/
25/18/12%)
without 
Preflash
No Prephotometry
No Prelighting 
Lighting at Set 
Level Only when 
Shooting
(Open or 
Closed)
(1/250 or 1/125)
(ISO 80, 100, 200, 
400)
(3000 to 7000K or 
OnePush)
EV 
compensation 
disabled
Exhibit Flash
No Lighting
No Prephotometry
No Lighting
(Open or 
Closed)
(1/2 to 1/1000 [s]) (ISO 80, 100, 140, 
200, 280, 400)
(Auto, 3000 to 
7000K, OnePush)
EV 
compensation 
disabled
Open
1/250
ISO 100
5500K
Open
1/250
ISO 100
Auto