Sony AR-208S User Manual
- 16 -
BEFORE USING THE NETWORK SCANNER FUNCTION
1
PROTECTING INFORMATION PROGRAMMED IN THE
WEB PAGE ([Passwords])
WEB PAGE ([Passwords])
The settings and information programmed in the Web page can be protected by establishing passwords (click
[Passwords] in the menu frame). The administrator must change the factory default password to a new password.
The administrator should also take care to remember the new password. From now on, the new password must be
entered each time you wish to configure settings in the Web pages.
A password can be set for the administrator and users.
[Passwords] in the menu frame). The administrator must change the factory default password to a new password.
The administrator should also take care to remember the new password. From now on, the new password must be
entered each time you wish to configure settings in the Web pages.
A password can be set for the administrator and users.
1
Click [Passwords] in the menu frame.
2
Enter the current password in "Admin
Password".
Password".
When establishing a password for the first time,
enter "Sharp" in "Admin Password".
enter "Sharp" in "Admin Password".
3
Enter passwords in "User Password"
and "Admin Password".
and "Admin Password".
• A maximum of 7 characters and/or numbers
can be entered for each password (passwords
are case sensitive).
are case sensitive).
• Be sure to enter the same password in
"Confirm Password" as you did in "New
Password".
Password".
4
When you have completed all entries,
click [Submit].
click [Submit].
The entered password is stored.
After setting the password, turn the machine
power off and then back on.
After setting the password, turn the machine
power off and then back on.
Be sure to enter "S" in upper case
and "harp" in lower case (passwords
are case sensitive).
and "harp" in lower case (passwords
are case sensitive).
Caution
When prompted to enter the password, a user
should enter "user" in "User Name" and an
administrator should enter "admin" in "User Name".
The appropriate password should be entered in
"Password". For more information, click [Help] in the
upper right-hand corner of the window.
should enter "user" in "User Name" and an
administrator should enter "admin" in "User Name".
The appropriate password should be entered in
"Password". For more information, click [Help] in the
upper right-hand corner of the window.