Fujifilm 4500N User Manual

68

The following is an explanation of network setting.

There are 2 methods of setting the network as shown below.

●

Set it by using the operation panel of PG4500N.

●

Set it by installing the setting software on the connected host (PC).

1

.

Press the ONLINE key on the operation panel to switch

the machine to OFFLINE condition.

2

.

When the machine is in OFFLINE mode, press the NEXT

key four times.

★

The message changes to "Network Setting".

3

.

Press the SEL key.

★

When the password is set, go to Procedure 4, and when

it is not set, go to Procedure 5.

4

.

Input the set password.

★

If the password is not correct, a "Failed to verify the

Password" message appears, so press the [ESC] key

and redo from Procedure 2.

5

.

Screen for setting TCP/IP opens. In the case of "Enable",

go to Procedure 5, and in the case of "Disable", go to

Procedure 13.

Network Setting

ESC

PREV

SEL

NEXT

ESC

PREV

SEL

NEXT

Password

0000 

[

  

]

[

  

]

–

+

Failed Verify
the Password

TCP/IP

[   ]

Enable +

[   ]

–

TCP/IP

[   ]

Disable +

[   ]

–

ESC

PREV

SEL

NEXT