Fujifilm 4500N User Manual

84

●

The regular maintenance program is to be conducted by the user is described below.  To keep

the machine in optimum condition, be sure to perform the regular maintenance shown in the

table below.

●

In addition to the regular maintenance program set forth below, a semi-annual maintenance

program by a qualified service engineer is available (at a reasonable charge).  It is recommended

that you consult your local dealer and sign a contract for periodic maintenance.

Weekly

Semi-annually

Annually

Reference

Page

Water in Water Bottle

Replacement (1)

35

Side Air Filter (2)

Cleaning (Replacement) (3)

85

Water Filter (4)

Replacement

86

Auto Calibrator Whiteboard

Cleaning

89

Scanner Cleaner

(5)

90

(1) The water in the water bottle must be replaced at one-week intervals or when "Warning Change

Water" appears.  The fresher the water, the higher the print quality.  Early replacement is

therefore recommended.

(2) The side air fillers should be replaced by a service engineer at the time of the semi-annual

maintenance in the case of a periodic maintenance agreement.  However, if the machine is

operated in a dirty or dusty environment, the filters should be replaced at more frequent intervals.

(3) When washed, dry the air filters thoroughly before installing them.

●

If the machine is operated in a dirty environment, conduct periodic maintenance every

three months.

(4) The water filter must be replaced when this is prompted by a message and the  alarm sounds.

The "Change Water Filter" message appears often about 500 A3-size prints have been made

or when six months has elapsed since the last water filter replacement.

(5) Use the scanner cleaner if white stripes appear on prints.

●

The following items are consumables.  When needed, place an order for them with your

local dealer.

●

Air filter

●

Water filter