Zebra Technologies 105Se User Manual
82
Zebra S-Series User’s Guide
9$&)DFWRU\6HWXS
Your Zebra S-Series Printer is factory set for 230 VAC operation if
requested when the order is placed. If it is necessary to reconfigure your
printer for operation at 115 VAC, see page 10.
requested when the order is placed. If it is necessary to reconfigure your
printer for operation at 115 VAC, see page 10.
.%'5$00HPRU\([SDQVLRQ
Note: This option is not available for the 105Se 300 dots/inch printer.
This option increases the printer’s dynamic memory capacity from 0.5 MB
to 1 MB. This supports longer label lengths and provides more capacity
for downloadable fonts and large graphic image files. Extra memory may
be installed at the factory or in the field.
to 1 MB. This supports longer label lengths and provides more capacity
for downloadable fonts and large graphic image files. Extra memory may
be installed at the factory or in the field.
'RWPPDQGGRWPP3ULQWKHDG
Note: This option is available on the 105Se printer only.
Optional 300 dot-per-inch and 152 dot-per-inch printhead densities
satisfy specified requirements for printing UPC/EAN symbologies or
high-density graphics and small, crisp text.
satisfy specified requirements for printing UPC/EAN symbologies or
high-density graphics and small, crisp text.