Kodak SRP 30 User Manual
Settings
Parameters for Tungsten and Fluorescent Light Detection
The parameter TL (tungsten light) is used to define the threshold value for the
artificial light detection. CTL is used to correct the colors of those frames whose
colors are above the threshold value. The strong yellow-reddish color cast is
neutralized and the prints take on a character resembling daylight.
artificial light detection. CTL is used to correct the colors of those frames whose
colors are above the threshold value. The strong yellow-reddish color cast is
neutralized and the prints take on a character resembling daylight.
Artificial light shots are subjects taken in a warm light (incandescent lamp, candle
light).
light).
Standard setting:
1.0
Step width:
0.1
Parameter Function Setting
range
CTL
Degree of correction for incandescent light
0.0 to +1.3
TL
Correction range for incandescent light
-4.0 to +4.0
CFL
Degree of correction for fluorescent light
0.0 to +2.0
FL
Correction range for fluorescent light
-4.0 to +4.0
Advantages Disadvantages
Reducing
the standard
values
the standard
values
Daylight subjects that correspond to
artificial light shots from a measurement
standpoint are recognized less
frequently as artificial light shots.
artificial light shots from a measurement
standpoint are recognized less
frequently as artificial light shots.
Not all artificial light shots are detected.
The prints get a strong yellow-reddish
color cast.
color cast.
Increasing
the standard
values
the standard
values
More frames are recognized as artificial
light shots.
light shots.
It may happen from time to time that
daylight shots with yellow, green or red
color portions are mistaken for artificial
light shots and are printed with a
complementary color cast.
daylight shots with yellow, green or red
color portions are mistaken for artificial
light shots and are printed with a
complementary color cast.
KODAK PROFESSIONAL SRP 30 Laser Printer
4-35