Kodak SRP 30 User Manual

Page of 310
Operator’s Guide 
Safety Precautions for the Handling of Chemicals 
WARNING: 
IMPORTANT: 
Follow these guidelines for the safe handling of chemicals in 
the equipment working area. 
General Guidelines 
• 
Be sure that all persons operating the equipment have a complete set of 
instructions for the handling of dangerous substances. 
• 
Be sure that all persons operating the equipment have training on the handling of 
dangerous substances at least once a year. 
• 
Check for sufficient room ventilation in the working area. The air should be 
exchanged at least eight to ten times per hour. 
Skin and Eye Protection 
Photographic solutions contain substances that may irritate the skin, the mucous 
membranes, or the eyes. They may also cause allergic skin reactions. For all 
procedures where photographic processing solutions may splash (for example, 
preparing and filling in chemical solutions or cleaning processing racks), follow these 
guidelines: 
• 
Avoid skin contact, especially with developer solutions. 
• 
Wear protective gloves and change them every day, if possible. It may be 
necessary to also wear a rubber apron during some maintenance operations. 
• 
Rinse all solutions that get on the skin with plenty of running water. 
• 
Wear protective goggles. If splashes do get into the eyes, wash them immediately 
with plenty of water, lifting the eyelids away from the eyes. Then consult an eye 
doctor if irritation occurs. 
Storage and Disposal 
• 
Store chemicals and processing solutions in a safe place. 
• 
Collect drained chemicals immediately and dispose of the solutions, observing the 
above provisions. 
• 
Use cold water to rinse chemical residue from the KODAK EKTACOLOR 
Processing Cartridge 75 cartons before disposing of them. 
 
KODAK PROFESSIONAL SRP 30 Laser Printer