Kodak SRP 30 User Manual
Settings
NOTE: The system might not be able to position and print some thin, unmasked B/W
films (such as ILFORD XP2 film) because they have no recognizable film
mask.
mask.
There is no scratch correction for B/W films. If scratch correction is enabled,
the system automatically disables it when printing B/W films, and enables it
again when printing color frames.
the system automatically disables it when printing B/W films, and enables it
again when printing color frames.
Defining a Standard Configuration
For each film mask—135 FF, 120, File print, etc.—you can define a Single and a
Package order configuration to be the standard configuration. The system always
displays the standard configuration in the first position in the configuration list and
uses it automatically:
Package order configuration to be the standard configuration. The system always
displays the standard configuration in the first position in the configuration list and
uses it automatically:
•
After a system startup
•
After a change of the film mask
•
After the change to Autoprint
Touch Standard (bottom left on the screen) to enable the displayed configuration as
the standard.
the standard.
KODAK PROFESSIONAL SRP 30 Laser Printer
4-79