Kodak SRP 30 User Manual

  

Production 

Use Manual Positioning for all orders that cannot be handled in the Autoprint or 
Reorder modes, such as: 

• 

Film strips 

− 

Without DX code 

− 

DX code illegible (space detection not possible in TFS / APL) 

• 

Film pieces with one or two frames that can’t be inserted in the film feeder 

NOTE:  Manual Positioning always uses Preview. Index Print is not possible with 

Manual Positioning. 

 

1. Touch: 

• 

• 

 

2.  If required, touch Change config. to change the configuration temporarily for the 

whole order. (See Using Print Configurations on Page 6-15.) 

3.  To begin the printing process: 

a.  Insert the film strip (more than two frames) into the film feeder, emulsion side 

down. The film strip is scanned and the first frame is displayed in Preview 
mode. 

Or 

b.  For film pieces with one or two frames, pull out the film mask and insert the 

film piece, emulsion side down. Push in the film mask. The film is scanned 
and displayed in Preview mode. 

IMPORTANT:  While the pop-up message is open informing you that the 

KODAK PROFESSIONAL SRP 30 Laser Printer 

6-27