Kodak SRP 30 User Manual
Operator’s Guide
5. Touch
Eject on the Manual positioning screen.
The printer ejects the read head cleaner back through the film feeder, then
performs a scanner pixel calibration (PIKO).
performs a scanner pixel calibration (PIKO).
6. Repeat Steps 2–5 two more times.
Cleaning the Drive Rollers in the Film Mask
Purpose:
To prevent film transport malfunctions by removing the deposits from the drive rollers
in the film mask.
in the film mask.
Necessary tools:
•
KODAK PROFESSIONAL Film Drive Roller Cleaner for SRP 30 (Catalog No.
813 4165).
813 4165).
Primary Procedure
1. Touch:
•
Print mode
•
Manual positioning
2. Dip the roller cleaner in water and remove the excess water with your fingers.
3. Insert the roller cleaner into the film feeder.
The roller cleaner is pulled into the film mask the same as with film. The
message Preview image is being calculated appears.
message Preview image is being calculated appears.
4. When the message disappears, touch Eject on the Manual positioning screen.
The printer ejects the roller cleaner into the film box and performs a scanner pixel
calibration (PIKO).
calibration (PIKO).
5. Repeat Steps 1–4 until both rollers are free of deposits.
Or see the alternate procedure on the next page.
8-6
KODAK PROFESSIONAL SRP 30 Laser Printer