Kodak 10/100 Network Interface Card User Manual

 

1-6

July 1998

Step 1:Determine your Network and Printing Environment. (Ch1:Intro/Overview)
NIC supports TCP/IP, Novell Netware, AppleTalk & Native Windows (NetBeui) Protocols.

NIC, NIC ConÞg S/W, Printer, Printer ConÞg S/W, i.e.PostScript Drivers and Raster Export 

Modules

NIC Pre-installed in Printer?

Step 3: Install the NIC in the Printer.
(Ch2:NIC Install) Requires NIC, Phillips or 
T10 Torque Screwdriver, and Static Strap.

Step 4: ConÞgure the NIC. (Ch3:FastManage, Ch9:Apple/Macintosh, Appendix: A Telnet)
Recommendation: Use defaults until successful network printing is demonstrated. 

Complete the following if using TCP/IP.   (TCP/IP minimally requires an IP Address). 
The quickest method (when IP = 0.0.0.0) is to use ÒarpÓ and ÒtelnetÓ commands. 
1) Set NIC mode switches in Telnet mode (D1 up, D2 down) and power cycle printer.
2) Use arp -s <IP Address> <NIC Ethernet Address> 
3) Use telnet <IP Address> 2002.
5) Follow Telnet Ethernet>TCP/IP>Set IP menus to set IP address and then Reset the NIC. 
6) Power cycle the printer.

Use Server 
Print Queues?

Step 5:ConÞgure Server (Ch4:Novell, Ch7/8 Windows 
NT, Ch10:Unix)

Step 6: ConÞgure Workstations for PostScript and/or Raster Mode Printing. (Ch5-8 
Windows, Ch9 Macintosh)
Install proper PostScript Driver (for printer in PostScript mode) and/or Kodak Export Module 
plug-in (for printer in raster mode).

Step7:Printer in PostScript Mode 
(Ch11:Printing)
Use File > Print 
from Applications and 
Select the Kodak Printer.

Step7:Printer in Raster Mode 
(Ch11:Printing)
Use File > Export 
from Adobe PhotoShop and Select 
the Kodak Printer.