Kodak 8650 User Manual

Operating the printer

3-6

October 1997

To enter Setup mode: Press Setup/Select while the printer is idle. 

To scroll through the settings: Press Print to scroll up, Cancel to scroll 
down. You scroll through the settings continuously. 

To select an option: When you find the setting whose options you wish 
to view, press Setup/Select. An asterisk (*) next to an option means it is 
selected. 

To exit Setup mode: Select SETUP:EXIT. Most changes you make are 
effective as soon as you exit Setup mode. The exceptions are when you 
return the settings to the factory defaults, and when you change the 
printer's operating mode. In these cases, the printer restarts itself when 
you exit Setup mode. Changes are effective immediately afterward.

To restore the printer settings to their factory settings: Press Setup/
Select when SETUP:DEFAULTS appears. Select FACTORY:RESET to 
restore all the printer settings to their factory settings.

IMPORTANT: If the Network Interface Card is installed, restoring the 

settings to their factory values may cause network 
printing problems.

The options you select must match your host computer settings.

There are different submenus associated with the PORTS menu. Which 
ones are available depends on whether the printer is running in Raster 
or PostScript mode, and on whether the Network Interface Card is 
installed.