AMT Datasouth 600 User Manual

Fastmark 600 Series User's Guide 

22

8.  Loop the ribbon over the Print Head Module.  Insert the Take-up Core  into the Take-Up

Area by first compressing the right side spring and snapping the left side of take-up core
into the left side of the notched wheel.  Make sure that the slots in left side of the core
mate with the notches on the left side ribbon drive wheel.

9.  To remove any slack in the ribbon, manually rotate the Take-up Core Wheel until the

ribbon from the Supply Holder is snug around the Print head Module and onto the Take-
up Core .

Ink Side of the Ribbon

Print Head Module

Take-Up Core

Take-Up Core Wheel