Motorola CPEI 750 User Manual

Installation

2

To install the Desktop CPEi 750 Series, review the following sections:
• Before You Begin
• Easy  Setup

Before you begin installation, check that you have received the following items with 
your Desktop CPEi 750:

In addition, you need:
• A  computer
• An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if 

your service provider has supplied you with two telephone numbers.

The CPE is easily set up in your home. Basic installation equipment needed are the 
power adapter and cord, Ethernet cable, a PC or laptop computer and the CPE device. 
If you want to use the VoIP functionality, you need an RJ-11 phone cable and a 
telephone.

Perform the following tasks before attaching the power cord or powering up the unit:
• Stand the CPE on a flat surface.
• Plug the power adapter into the power connector on the back of the unit.
• Plug the AC power cord into an AC outlet.
• Plug one end of the Ethernet cable into the Ethernet connector on the back of the 

unit.

• Plug the other end of the Ethernet cable into the Ethernet connector of your 

computer.

• To use VoIP functionality of the phone, plug one end of the phone line into the 

activated phone connector on the back of the unit. Phone line activation is 
dependent upon your service contract.

• Plug the other end of the phone line into the phone line connector of your 

telephone.

Table 2-1 In the box with your CPE, you should have

AC Adapter

Power adapter and cord connects the 
Desktop CPE to an AC electrical outlet.

Ethernet Cable

The Ethernet cable connects the Internet 
port on your Desktop CPE to your PC or 
laptop computer.

Desktop CPEi 750 Quick Start Guide

Desktop CPEi 750 Quick Start Guide