Lenovo Q180 Series User Manual

9

User Guide

Method 1: Automatic Installation

Repeatedly press and release the F2 key once turning on the computer until the 
Lenovo Rescue System open, then select Drivers and Application Installation.

Follow the screen prompts to install the Lenovo Drivers and Application Installation. 
Click Install to start installing the Lenovo Drivers and Application Installation.

The system will restart. After the system has restarted, the installation process will 
continue until completion.

Method 2: Manual Installation

In the Windows system, Click Start 

→ All Programs → Lenovo → Lenovo 

Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually according 
to the prompts.

  Notes: 

1.  It is recommended not to install the software which is already on the 

computer.

2.  Before accessing the operating system, make sure that the Drivers and 

Application installation has been installed automatically. After that, the 
manual installation function can be used. 

System Setup configures the network configuration for the Lenovo Rescue
System to ensure your Rescue System can connect to internet. In addition, System 
Setup sets and manages all passwords for the Lenovo Rescue system.

2.3.1 Launch

Repeatedly press and release the F2 key once turning on the computer until the 
Lenovo Rescue System open, then select System Setup.

2.3.2 Network Settings

Depending on the network access mode of the computer, select “ADSL” or “LAN
Connection” in the network connection modes.
1.  If you select “ADSL” input the username and password of the ADSL connection.
2.  If you select “LAN connection” configure the IP address and proxy server of the 

LAN.