Panasonic CF-T2 Series User Manual
101
Dealing with Problems (Advanced)
The device will not operate if a
different mouse driver is installed
different mouse driver is installed
z When you install a different mouse driver, such as IntelliPoint for Microsoft's
IntelliMouse, the mouse driver currently installed in the computer may need to
be uninstalled. Use the following procedure to uninstall this driver.
be uninstalled. Use the following procedure to uninstall this driver.
A
Display the screen to uninstall the program.
Select [start] - [Control Panel] - [Add or Remove Programs].
Select [start] - [Control Panel] - [Add or Remove Programs].
B
Uninstall [Synaptics Pointing Device Driver] and [TouchPadUtility]
separately.
separately.
A PC Card does not work
z Make sure the card is properly inserted.
z Confirm that the card conforms to the PC Card Standard.
z Note that after a driver (PC Card driver on other) is installed, the computer must
z Confirm that the card conforms to the PC Card Standard.
z Note that after a driver (PC Card driver on other) is installed, the computer must
be restarted.
z Check that the proper port settings have been made.
z Read the operating instructions for the PC Card. Or, you may need to call the
z Read the operating instructions for the PC Card. Or, you may need to call the
manufacturer of the PC Card.
z Try removing/reinserting the PC Card by following the proper procedure.
(
)
z Confirm that a driver for your operating system has been installed.
z ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and card
z ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and card
requiring 12V are not supported.
USB floppy disk drives do not work as
a boot drive
a boot drive
z Only the Panasonic CF-VFDU03 USB floppy disk drive (optional) can be used.
z Make sure [Legacy USB Support] is enable in the Setup Utility.
z After powering off the computer, connect the USB floppy disk drive and restart
z Make sure [Legacy USB Support] is enable in the Setup Utility.
z After powering off the computer, connect the USB floppy disk drive and restart
the computer.
You do not know the available RAM
module
module
⇒ Operating Instructions "RAM Module"
Cannot tell whether the RAM module
has been correctly installed
has been correctly installed
z You can check whether the RAM module is recognized using [Information]
menu in the Setup Utility. If the RAM module is not recognized, turn the
computer off and reinsert the RAM module.
computer off and reinsert the RAM module.
The RAM module has not been
recognized
recognized
z Make sure the RAM module has been properly inserted.
z Use the RAM module that supports the recommended specifications (
z Use the RAM module that supports the recommended specifications (
⇒
Operating Instructions "RAM Module").
The address map for IRQ, I/O port
address, etc. is unclear
address, etc. is unclear
z The current address map can be displayed with the following procedure.
[start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [View] - [Resources by type].
[Hardware] - [Device Manager] - [View] - [Resources by type].
Connecting Peripherals