Panasonic CF-T2 Series User Manual

Dealing with Problems (Advanced)

When the previous item is not the 
cause

z Press F9 in the Setup Utility.  This will restore the Setup Utility's settings to their 

default values (except the password settings).

z Try removing all peripheral devices.
z Check a disk error using the following procedure.

A

Display [Local Disk (C:) Properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer], 
and select [Properties].

B

Select [Tools] - [Check Now].

C

Select [Start] after selecting required items in [Check disk options].

z At startup, hold down 

F8 when [Panasonic] boot screen disappears

, and 

release your finger when the Windows Advanced Options Menu is displayed. 
Start the computer in Safe Mode, and confirm the details of the error.

*1

When [Password on boot] is set to [Enable], [Enter Password] appears after the 
[Panasonic] boot screen disappears. Hold down 

F8

 soon after inputting the password 

and pressing 

Enter

.

„ Enter Password

Even after entering the password, 
[Enter password] is displayed again.

z The computer may be in ten-key mode.

„ Display

No display after powering on

z When there is no display to an external display,

• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.

z The display destination may be set to the external display.

Try changing the display destination by pressing 

Fn+F3.

If you want to switch the display destination repeatedly by pressing 

Fn+F3, 

make sure that the display destination has switched completely each time 
before pressing 

Fn+F3 again.

z Press 

Fn+F2 and adjust the brightness. 

„ Starting Up