Panasonic CF-T2 Series User Manual
95
Dealing with Problems (Advanced)
When the previous item is not the
cause
cause
z Press F9 in the Setup Utility. This will restore the Setup Utility's settings to their
default values (except the password settings).
z Try removing all peripheral devices.
z Check a disk error using the following procedure.
z Check a disk error using the following procedure.
A
Display [Local Disk (C:) Properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer],
and select [Properties].
Select [Local Disk(C:)] with the right button in [start] - [My Computer],
and select [Properties].
B
Select [Tools] - [Check Now].
C
Select [Start] after selecting required items in [Check disk options].
z At startup, hold down
F8 when [Panasonic] boot screen disappears
, and
release your finger when the Windows Advanced Options Menu is displayed.
Start the computer in Safe Mode, and confirm the details of the error.
Start the computer in Safe Mode, and confirm the details of the error.
*1
When [Password on boot] is set to [Enable], [Enter Password] appears after the
[Panasonic] boot screen disappears. Hold down
[Panasonic] boot screen disappears. Hold down
F8
soon after inputting the password
and pressing
Enter
.
Enter Password
Even after entering the password,
[Enter password] is displayed again.
[Enter password] is displayed again.
z The computer may be in ten-key mode.
Display
No display after powering on
z When there is no display to an external display,
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
• Confirm your display is powered on.
• Check the settings for your external display.
z The display destination may be set to the external display.
Try changing the display destination by pressing
Fn+F3.
If you want to switch the display destination repeatedly by pressing
Fn+F3,
make sure that the display destination has switched completely each time
before pressing
before pressing
Fn+F3 again.
z Press
Fn+F2 and adjust the brightness.
Starting Up