Polycom 3804-11530-222 User Manual

Release Notes - SIP Application 

 

Changes 

 

Copyright © 2007 Polycom, Inc. 

Page 27 

sip added voice.handset.rxag.adjust.IP_650 

voice.handset.txag.adjust.IP_650 
voice.handset.sidetone.adjust.IP_650 
voice.headset.rxag.adjust.IP_650 
voice.headset.txag.adjust.IP_650 
voice.headset.sidetone.adjust.IP_650 

These parameters control gain settings 
which are specific to the SoundPoint IP 650 
phone. The values should not be modified. 

sip 

added 

dir.local.volatile.8meg 

This parameter applies only to platforms 
with 8 Mbytes of flash memory.  
It can be set to 0 or 1 and is 0 by default. 
If set to 1, use volatile storage for phone-
resident copy of the directory to allow for 
larger size. 

sip 

added 

dir.local.nonVolatile.maxSize.8meg 

This parameter applies only to platforms 
with 8 Mbytes of flash memory. 
It can be set from 1 to 100. The units are 
Kbytes and the default is 100. 
This is the maximum size of non-volatile 
storage that the directory will be permitted 
to consume. 

sip 

added 

log.level.change.usb 

This parameter is used to set the logging 
detail level for the “usb” module. 

sip added prov.fileSystem.ffs0.8meg.minFreeSpac

e 

The minimum free space in Kbytes to 
reserve in the file system when 
downloading files from the boot server. 
It is recommended that this value should not 
be modified. 
The allowed range for this parameter is 5 to 
512 and the default is 512. 

sip 

added 

usb.enable 

This parameter enables or disables the 
USB port on the phone. It can be set to 0 or 
1. The Null default is 0. 

sip 

added 

usb.bulkDrive.enable 

This parameter enables or disables support 
for a USB bulk drive (“memory stick”) 
connected to the USB port on the phone. It 
can be set to 0 or 1. The Null default is 0. 

sip 

added 

usb.bulkDrive.name 

This parameter is a string which specifies 
the name of the mounted USB drive. The 
Null default is “usbDrive”. 

sip changed 

dir.local.volatile.maxSize 

 

prov.fileSystem.rfs0.minFreeSpace  
ramdisk.bytesPerBlock 
res.finder.sizeLimit 
res.finder.minFree 
res.quotas.x.value 
mb.limits.nodes 
mb.limits.cache 

For the SoundPoint IP 650 platform only, 
the values specified by these parameters 
are replaced internally with double the 
value. This is because the SoundPoint IP 
650 platform has 32 Mbytes of memory 
instead of 16 Mbytes. 

 

• 8428: 

Split call signaling processing from "lamp management" processing