Brother HS-5000 User Manual

CHAPTER 4 CONTROL PANEL

4–5

English: CS3 User’s Guide, Chapter 4

The printer has the following test print modes.

1. Keep the 

 button depressed until all four LEDs  light.  Then, release

the button.

The printer enters test print mode.  The 

 LED blinks to indicate that

the first choice, Print Config, is selected.  See the table below.

2. Press the 

 button to select another test.

Every time you press the button, the blinking LED changes to select another
choice.  See the table below.

3. Press the 

 button to perform the selected choice.

LED

Choice

Function

Print Config

The printer prints the current printer settings.

Print Fonts I

The printer prints a list of the printer resident
fonts.

Print Fonts P

The printer prints a list of the permanent
download fonts.

Test Print

The printer prints a test page.

4. The printer returns to the ready status after printing.

✒ Note
Press the buttons gently.  Do not press with too much force or hold the buttons
down for a long time. If you do the operation might now start.