Yamaha DSP-AX750SE User Manual
63
English
SET MENU
A
D
V
ANCED
OPERA
T
ION
Use to adjust the optional system parameters.
■
Display set
A)DISPLAY SET
Dimmer
DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to
Choices: –4 to
0
Video conversion
V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to both S-Video and component signals.
This allows you to output converted video signals from the
S VIDEO or COMPONENT VIDEO jacks when no
S-Video or component signals are input. This feature also
converts S-Video signals to component signals when no
component signals are input.
Choices:
(VIDEO) signals to both S-Video and component signals.
This allows you to output converted video signals from the
S VIDEO or COMPONENT VIDEO jacks when no
S-Video or component signals are input. This feature also
converts S-Video signals to component signals when no
component signals are input.
Choices:
ON
, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-Video and
• Select ON to convert composite signals to S-Video and
component signals, and to convert S-Video signals to
component signals.
component signals.
• Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-Video) between each component.
connections (i.e., S-Video) between each component.
• When converting composite video or S-Video signals from a
VCR to component video signals, the picture quality may suffer
depending on your VCR.
depending on your VCR.
OSD shift
OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Gray back
GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed if OFF is selected.
Choices:
a gray background when there’s no video signal input.
Nothing is displayed if OFF is selected.
Choices:
AUTO
, OFF
If “GRAY BACK” is set to OFF, no information will be displayed
on the screen when video signals are not being input.
on the screen when video signals are not being input.
Component OSD
CMPNT OSD
Use this feature to turn on/off OSD output to the
COMPONENT VIDEO MONITOR OUT jacks when
using the SET MENU, test tone or parameter functions.
Choices:
COMPONENT VIDEO MONITOR OUT jacks when
using the SET MENU, test tone or parameter functions.
Choices:
ON
, OFF
• Select ON to output the OSD signals from
COMPONENT VIDEO MONITOR OUT jacks.
• Select OFF if you do not want to output the OSD
signals from COMPONENT VIDEO MONITOR OUT
jacks.
jacks.
Set menu functions even when OFF is selected.
■
Memory guard
B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices:
program parameter values and other system settings.
Choices:
OFF
, ON
Select ON to protect:
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
• DSP program parameters
• All SET MENU items
• All speaker levels
• The on-screen display (OSD) mode
When “MEMORY GUARD” is set to ON, you cannot use the test
tone or select any other SET MENU items.
tone or select any other SET MENU items.
3 OPTION MENU
Notes
.A)DISPLAYSET
B)MEMORYGUARD
C)PARAM.INI
D)ZONESET
C)PARAM.INI
D)ZONESET
[]/[]:Up/Down
[SELECT]:Enter
[SELECT]:Enter
3
OPTION
MENU1/2
p
p
.DIMMER;;;;;;;;;0
VCONV
;;;;;;;;ON
OSDSHIFT
;;;;;;0
GRAYBACK
;;;AUTO
CMPNTOSD
;;;;;ON
[]/[]:Up/Down
[<]/[>]:sELECT
[<]/[>]:sELECT
A)DISPLAY
SET
p
p
Note
Note
Note
)OFFON
[<]/[>]:Select
[SELECT]:Return
[SELECT]:Return
B)MEMORY
GUARD
01EN_00_RXV750_GB.book Page 63 Thursday, February 12, 2004 5:15 PM