Brother 1300 User Manual

 

 

 

 

 

Standard PQ foot used for attaching zippers and 
piping 
 

Feed dogs up using one of the three settings based on 
fabric and whether the pin feed is used (such as 
attaching zippers to stretch fabric). Other settings are 
based on the needs of the project. 
 

Corded piping, linen and cotton fabric, transfer web 
 

General Sewing Directions: 

 Attach the foot and use screw at back to position the movable foot relative to the needle. Depending on 
the type of zipper you are installing, one of several methods may be used. Loosen the clamp screw at the 
back and slide the presser foot to either side so the needle fits in the opening on the foot without hitting 
the metal side. Turn the balance wheel slowly toward you to check that the needle does not hit the presser 
foot. Secure the clamp screw.  
 

Pin feed 

+/- 4 

2.5 to 3 

Sample uses corded piping as a trim, not anchored in a 
seam. Pin Feed and Seam Guide were used to decorate a 
plain fabric attached with transfer web to the center. The 
Zipper foot (with pin feed engaged) attached the trim. 

 
Brother PQ-Accessories Workbook                                   July 2003                                                   73