Sony computer User Manual

Connect a port replicator to the computer while the computer is off. Use the AC adapter (not the battery) to power the
computer while it is connected to a port replicator. 

  

 Moving the computer with the port replicator attached could disconnect the AC adapter or power cord, and may cause

the computer to lose power or malfunction. 

1.

Turn off the computer, and disconnect all attached devices. 

2.

On the bottom of the computer, slide the port replicator cover down until the port replicator connector is
completely visible. lift and remove the port replicator cover to display the port replicator connector. 

  

 You can charge the battery by installing it before you connect the port replicator. The battery automatically

charges once you connect the AC adapter. 

3.

Align the connector on the bottom of the computer with the port replicator connector, and gently push the
computer down until it clicks into place. 

4.

Plug the AC adapter into the DC IN port on the port replicator, and plug the power cord into the AC adapter and
an AC outlet. The power indicator turns on.