Sony DRC-SR100E User Manual

E Remaining time (approx.)

When you complete creating DVD, it is 
exited automatically.

• When you cannot store all the recordable data 

on a DVD, follow the on-screen instructions, 
then insert a new DVD onto the disc drive.

• The maximum number of recordable movie 

files is 98 regardless of the amount of data 
copied to one DVD. When the movie files 
exceeds 98, the rest of files is saved on a new 
DVD.

• It may take more time to create DVD when 

the movie file is small.

• To create another DVD, click [Create another 

disc set].

• After creating a DVD, check that the DVD can be 

played back properly on a DVD player or other 
devices. When you cannot play back the DVD 
properly, copy the images to the computer by 
following the steps on page 12. Then save the 
images on DVD by referring to “Creating a DVD 
with edited images” (p.18).

• If you check that the DVD can be played back 

properly, It is recommended that you delete the 
image data from the camcorder using the 
functions on the camcorder by following the steps 
in “Camera Operating Guide”. In this way, you 
can increase the free hard disk space of your 
camcorder.

• To copy a created DVD, use the DVD creation 

software installed on your computer. You cannot 
copy created DVDs with the supplied software.

• You cannot record image data on the hard disk of 

your computer in this operation.

• You cannot delete image data on the hard disk of 

the camcorder in this operation.

• You cannot edit images on the created DVD with 

a computer. When you want to edit the images 
with the computer, copy the images onto the 
computer (p.12).

• If DVD creation ends unexpectedly, the last 

correctly saved file is completed. When you create 
a DVD with One Touch DVD Burn function next 
time, the image data not saved on the DVD is the 
first one to be saved.

• When the created DVD is played back, the ending 

of each movie pauses for a few seconds.

• The images that have been copied on your 

computer using Easy PC Back-up are also saved 
on a DVD with One Touch DVD Burn function.

[Safe to Remove Hardware] appears.

• Do not remove the USB cable while the 

ACCESS lamp is lit.

• Make sure to remove the USB cable before 

turning off your camcorder.