Toshiba TECRA S1 User Manual
2 Troubleshooting
2.6 2.5-inch HDD
2-22
TECRA S1 Maintenance Manual
Procedure 5 Connector Check and Replacement Check
The HDD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1
The HDD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1
Make sure the following connectors have been firmly connected to the HDD,
system board and CPU.
system board and CPU.
HDD
System board
CPU
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
If there is still an error, perform Check 2.
Check 2
The HDD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
Check 3
The System board may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 4.
disassembling instructions in Chapter 4. If the problem persists, perform
Check 4.
Check 4
The CPU may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4.
disassembling instructions in Chapter 4.