Toshiba 960-809 User Manual

2) HARD DISK TEST 

The following message will appear. 

 

Select the Hard Disk DRIVE to be tested, then press Enter. 

［1］：Drive 1 
［2］：Drive 2 
［3］：Drive 3 
［4］：Drive 4 
［0］：Drives 1 to 4 
 

 

This message is used to select the error dump operation when a data compare error is 
detected. Select 1 or 2. 
 

[1]: The dumped data is not displayed on the screen even if a data compare error 

occurs.(Only pressing the [Enter] key is also considered valid.) 

[2]: The dumped data is displayed on the screen when a data compare error occurs. 
 

 

This message is used to select whether or not the HDD status is displayed on the screen. The 
HDC status is described in section 3.20. Select 1 or 2. 

 

[1]: The detail status is not displayed. (Only pressing the [Enter] key is also considered 

valid.) 
 

[2]: The detail status is displayed.