Toshiba A1 User Manual
3.27 SETUP 3
and Diagnostics
Moving Within the SETUP Menu and Changing Values
1. Press Å and Æ to move between the two columns. Press
↑ and ↓ to move between
items in a column. Press Fn+
↑ (
PgUp)
and Fn +
↓ (
PgDn)
to move between the
two pages.
2. Press either the
Space bar
or
Back Space
to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press
End
to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press
N
. Repeat the steps above.
3. To accept the changes, press
Y
.
NOTE: You can press
Esc
to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes. When SETUP is displayed at the
next time, the current configuration appears.
next time, the current configuration appears.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press
Home
.
2. To accept the default settings, press
End
and then press
Y
.
NOTE: When you execute the default setting, the following settings are not changed:
HDD
mode
Password
Write
Policy
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
3-71