Toshiba 960-498 User Manual

The following describes the procedure for installing the LCD unit and FL inverter (See 
Figure 4-39 to 4-42). 

1.  Secure the LCD supports (left and right) to the LCD unit with the following screws. 

•  M2×3C   

SUPER THIN HEAD screw   

x4 

2.  Stand the LCD unit on the display cover and connect the LCD harness to the 

connector on the back of LCD. 

3.  Stick the aluminum tape on the connector of LCD harness. 

4.  Secure the LCD unit with the following screws. 

•  M2×4Z   

SUPER THIN HEAD screw   

x4 

5.  Connect LCD harnesses to the connector CN1 and CN2 of the FL inverter. 

6.  Connect HV harnesses to the connector CN3 and CN4 of the FL inverter. 

7.  Install the FL inverter while sticking the double-sided tape and secure it with the 

following screw. 

•  M2×4Z   

SUPER THIN HEAD screw   

x1 

8.  (for model with wireless LAN or Bluetooth) 

Insert one insulator under the LCD unit and stick the other one to the FL inverter. 

9.  Install the display mask and lock the latches. 

10. Secure the display mask with the following screws and stick two mask tapes on the 

front. 

•  M2.5×6B 

 THIN 

HEAD 

screw    x2 

11. Install the hinge caps to the both sides.