Bixolon SRP-350 User Manual
Rev. 2.01
- 40 -
SRP-350/352plusA&C
4-3-9 Thermal Printer Head Circuit
First, the CPU sends a Serial Clock and Serial Data 256Bits(32Bytes) to the Shift Register of the Thermal
Printer. The Serial Data are stored to each Shift Register in the Thermal Printer. Because the Data#1 Pin and
the Data#2 pin are shorted on Main PCB, the Data(256Bits) are stored in both Shift Register#1 and #2.
Second, the CPU send a Latch Signal to the Thermal Printer. Then, the Data of both Shift Register#1 and #2
(256*2=512 Bits) are moved to the Latch Register. After that, the CPU sends a Strobe Signal to the Thermal
Printer. Then, the Printer outputs the Serial Data. Each Strobe Signal manages the Printer Dot.
First, the CPU sends a Serial Clock and Serial Data 256Bits(32Bytes) to the Shift Register of the Thermal
Printer. The Serial Data are stored to each Shift Register in the Thermal Printer. Because the Data#1 Pin and
the Data#2 pin are shorted on Main PCB, the Data(256Bits) are stored in both Shift Register#1 and #2.
Second, the CPU send a Latch Signal to the Thermal Printer. Then, the Data of both Shift Register#1 and #2
(256*2=512 Bits) are moved to the Latch Register. After that, the CPU sends a Strobe Signal to the Thermal
Printer. Then, the Printer outputs the Serial Data. Each Strobe Signal manages the Printer Dot.
STB No.
DOT No.
DOTs/STB
SRP-350plus Strobe Processing
STB1
1 ~ 256
256
STB2
257 ~ 512
256
The content of data is same.
[Figure 4-13 Thermal Printer Block Diagram]
/LATCH
STROBE1
STROBE2
DATA#1,2
CLK
256bits
256bits
256bits
Printing(1~256)
Printing(1~256)
Printing(257~512)
256 CLK
[Figure 4-14 Thermal Printer Timing Waveform]