Bixolon SRP-350 User Manual

 

Figure 2-1 AC Adapter Installation 

 

1. Mack sure the printer is turned off with the 

    side of the switch. 

2. Plug the DC cord connector into the power jack 

  on the printer. (Plug the flat side down) 

3. Plug the AC Adapter power cord into the wall 

 outlet. 

Figure 2-2 I/F Cable Installation 

 

1. Turn off the printer, host ECR and Computer. 
2. Plug RS-232, USB or Parallel Cable connector 
    into the I/F connector on the printer. 
3. Tighten the screws on both sides of the connector. 
4. Turn on the printer, host ECR and Computer. 

Figure 2-3 Cash Drawer Cable Installation 

 
1. Turn the printer off. 
2. Plug the cash drawer cable connector into 
    the connector on the printer. 
    (To remove the cash drawer cable, press 

the clip on the connector, grasp the connector 
and pull it out.) 

 

 

Figure 2-4 Paper Roll Installation 

 

1. Open the cover printer and remove the used 

paper roll core if there is one. 

2. Load the paper roll on the paper holder as 

 shown. 

3. Close the cover printer.

 

 

 

Cash Drawer 

Connector 

Cash Drawer Cable 

Interface Cable 

Interface Connector