Gateway 9210 User Manual

www.gateway.com

Make sure that the monitor warms up for at least 30 minutes before making a final 
judgment about color uniformity.

Make sure that:

■

The monitor is not positioned too close to another monitor, electric fan, or fluorescent 
light.

■

You demagnetize the screen using the monitor’s degauss feature. For more information 
on degauss, see the monitor’s documentation.

The monitor may use thin damper wires, located approximately 1/3 of the way from the 
upper and lower screen edges, to stabilize the internal aperture grille. These wires are most 
obvious when the monitor displays a white background. The aperture grille allows more 
light to pass through the screen for brighter colors and greater luminescence. The damper 
wire is a critical part of the overall monitor design and does not negatively affect the 
monitor’s function.

■

If the power button LED is green, the server is turned on, but you may not be seeing 
an image on the monitor. For monitor troubleshooting, see 

■

If your server is plugged into a surge protector or UPS, make sure that the surge 
protector or UPS is connected securely to an electrical outlet, turned on, and working 
correctly. One way to check this is to plug the server directly into a wall outlet, 
bypassing the surge protector or UPS.

■

Make sure that the electrical outlet is working by plugging a working device, such as 
a lamp, into the outlet, then turning it on to test the outlet.

■

Open your server and make sure that the power supply cable and power button cable 
are connected correctly to the system board.

■

The short beeps indicate the server has encountered some type of error. See