Bixolon SRP-270 User Manual

 

 
1. Before you disassembly the Main PCB, 

you should remove : 
- Plate Bottom (see Chapter 4-2) 
- Cover Assy (see Chapter 4-3 & 4-4) 
- Case Upper Assy (see Chapter 4-6) 
- Printer Assy (see Chapter 4-7 & 4-8) 

2. Remove four screws securing the Main PCB. 

Separate the Main PCB from the Main Frame.

 

 
 
 

 
1. Before you disassembly the Interface Board Assy, you should remove : 

- Plate Bottom (see Chapter 4-2) 
- Cover Assy (see Chapter 4-3 & 4-4) 
- Case Upper Assy (see Chapter 4-6) 
- Printer Assy (see Chapter 4-7& 4-8) 

 
2. Remove two screws and take out the Interface Board Assy, as shown below.