Bixolon SRP-270 User Manual

 

 
To disassemble this printer, perform the assembly procedures described in section 8-8 Assembly in the 
reverse sequence. First, the main assembly blocks are disassembled and divided into the sub-assembly 
blocks, then each of the individual blocks is disassembled. 
 
Disassembling printer components beyond the example shown in exploded view of SMP-710/710N at the 
PPL may result in damage to the printer and its functions, so you are advised not to do so. 
 
 
 
 

 
The assembly process is divided into the sub-assembly and main assembly procedures. First, assemble the 
sub- assembly, then proceed to assembling the main assemblies. 
 
Perform assembly while referring to component shapes and mounting positions shown in exploded view. 
 
The '*' symbol in the "Assembly Step" column indicates the need for a (Check) or (Adjustment). The 
(Adjustment) process is explained in section 8-9. Even if only a small amount of disassembly has been 
performed, confirm the presence/absence of the pertinent adjustment point during assembly. 
 
Circled numbers in the "Assembly Step" column indicate that lubrication is required during assembly of the 
component and that such lubrication will be difficult unless performed during assembly. 
 
Details on the application of lubricants or adhesives, including point that require application after total 
assembly of the printer, are described in section 8-4 Lubrication and Adhesive Application perform such 
application while referring to exploded view. 
 
All small parts are represented by abbreviations as listed in the table below. 
 
* List of abbreviations for small parts 
 

Abbreviation 

Explanation 

WBH 

Washer faced Binding Head Screw 

PH 

Pan Head machine screw 

WPH 

Washer faced Pin Head Screw 

T/T PH 

Pan Head Taptite screw 

T/P PH 

Pan Head Tapping Screw 

PW Plain 

washer 

WW Wave 

Washer 

PSW 

Poly slide washer with slit 

SP Spring 

pin 

RE 

Retaining ring type-E 

PP Parallel 

pin 

FS Franged 

Screw