IBM A40I TYPE 2271 User Manual
Flash (BIOS/VPD) update procedure
Attention:
Refer to the information label located inside the system unit cover for any model-specific
information.
information.
1.
Power-off the computer.
2.
Insert the flash update diskette into drive A.
3.
Power-on the computer.
4.
When the Update Utility appears; select the country/keyboard, then press
Enter
Enter
.
5.
If the computer serial number was previously recorded, the number is
displayed with an option to update it. Press Y to update the serial number.
displayed with an option to update it. Press Y to update the serial number.
6.
Type the 7-digit serial number of the computer you are servicing, then press
Enter
Enter
.
7.
Follow the instructions on the screen to complete the flash (BIOS/VPD) update
procedure.
procedure.
Flash recovery boot block jumper
Attention:
If an interruption occurs during a Flash/BIOS upgrade, the BIOS might be left in an
unusable state. The Boot Block jumper enables you to restart the system and recover the
BIOS.
unusable state. The Boot Block jumper enables you to restart the system and recover the
BIOS.
To perform a Flash/BIOS recovery using the recovery jumper, use the following
procedure.
procedure.
1.
Power-off the computer and remove the cover.
2.
Move the system board recovery jumper to the clear position. Refer to
“A40/A40P/A40i system board layout” on page 29 or the label inside the
computer for more information.
“A40/A40P/A40i system board layout” on page 29 or the label inside the
computer for more information.
3.
Insert the upgrade diskette into the diskette drive.
4.
Power-on the computer. The IBM Logo will appear.
5.
When the Flash Update Utility appears, select the country/keyboard, then press
Enter
Enter
.
6.
If the computer serial number was previously recorded, the number is
displayed with an option to update it. Press Y to update the serial number.
displayed with an option to update it. Press Y to update the serial number.
7.
Type the 7-digit serial number of the computer you are servicing, then press
Enter
Enter
.
8.
Follow the instructions on the screen to complete the flash (BIOS/VPD) update
procedure.
procedure.
9.
When you are instructed to reboot the computer, power-off the computer and
move the recovery jumper to the normal position. Then replace the cover and
power-on the computer.
move the recovery jumper to the normal position. Then replace the cover and
power-on the computer.
88
Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer