Epson 10020 User Manual

When you finish setting the options in the Setup menu,
highlight the 

Exit 

option and press Enter. You see a summary

such as this:

Real-timeclock

Time

13:35:31

Date

08-30-1989

Primary serial port

Baud rate 1200 bps

Parity None

Data length 7 bits

Stop bits 1 bit(s)

Secondary serial port

Baud rate 1200 bps

Parity None

Data length 7 bits

Stop bits 1 bit(s)

Change settings

E x i t   w i t h o u t   s a v i n g

** EXIT AND SAVE **

Check the list to see if all the information is correct. If any
setting is incorrect, highlight 

Change settings 

and press

Enter. The main Setup menu appears and you can change the

setting, as necessary.

If you did not make any changes or you want to cancel the

changes you made, highlight 

Exit without saving

and press Enter. The Operation menu appears on the screen.

Press 0 and Enter to return to the MS-DOS command prompt.

Note

If you changed the time or date, the new setting will be in

effect even if you exit the Setup program without saving

your changes.

If you want to save the settings you made, follow these steps:

1. Remove the Reference diskette from drive 

A.

Changing DIP 

Using Setup

A-13