Epson 10020 User Manual

The Setup program on your Reference diskette lets you define

the baud rate, parity, data length, and number of stop bits for a

primary and a secondary serial port. See “Running the Setup
Program” in Appendix A for instructions.

To redirect the printer data you can use either the MS-DOS

MODE command or the Epson MENU utility. (MENU

provides an easy way to use MODE. For instructions, see the
description of the Mode Settings option of the MENU program

in your MS-DOS Reference Manual.)

Follow these steps to connect the power cord:

1.

Insert the power cord into the AC power inlet on the back

panel, as shown below. To avoid an electric shock, be sure
to plug the cord into the computer before plugging it into
the wall socket.

2.

Plug the other end of the power cord into a three-prong,

120-volt, grounded electrical outlet.