Epson 286 PLUS User Manual

9.

If you see one of these messages, make sure the diskette is

properly inserted in the drive. On a 5 1/4-inch diskette drive,
make sure the drive latch is closed. Try the operation again.

If the problem persists, try removing the diskette and

reinserting it. This may solve the problem if the diskette was

not seated properly in the drive.

If the error message still occurs, you may have a defective

diskette. Use the MS-DOS COPY command to copy the

files from the bad diskette to a new diskette. (See your
MS-DOS Reference Manual for instructions.)

If you see no error messages but there is something wrong

with the data in a file, MS-DOS or an application program
may have updated the storage information on the diskette

incorrectly. This is probably the case if you have one of

these problems:

Part of a file is missing

A file includes parts of other files

An expected output file is missing.

To make the necessary repairs, use the MS-DOS program
CHKDSK. See your MS-DOS Reference Manual for

instructions.

If you see an error message or have difficulty with a diskette

drive, check the following:

1. If you are having problems with a new diskette drive that

your dealer installed for you, consult your dealer about the
problem.