DELL 530sb User Manual
162
Removing and Installing Parts
Installing the I/O Panel
1 Place the I/O panel into the slot.
NOTICE:
Take care not to damage the cable connectors and the cable routing clips
when sliding the I/O panel into the computer.
2 Replace and tighten the screw that secures the I/O panel to the chassis.
3 Reconnect the cables to the system board.
4 Replace the bezel (see "Replacing the Bezel" on page 136).
5 Replace the computer cover (see "Replacing the Computer Cover" on
3 Reconnect the cables to the system board.
4 Replace the bezel (see "Replacing the Bezel" on page 136).
5 Replace the computer cover (see "Replacing the Computer Cover" on
6 Connect your computer and devices to an electrical outlet, and turn
them on.
7 Verify that the computer works correctly by running the Dell Diagnostics
1
I/O panel
2
screw
2
1
book.book Page 162 Monday, October 6, 2008 11:38 AM